APC 10000VA Smart-UPS:
The APC 10000VA Smart-UPS represents an advanced power protection system engineered for critical enterprise environments. Through its sophisticated double-conversion online technology and comprehensive management features, this high-density UPS delivers superior power protection for mission-critical equipment.
Power Output Capabilities
The system provides robust power delivery with 10000W/10000VA capacity, operating at configurable voltages of 220V, 230V, or 240V. Furthermore, it maintains synchronized frequency at 50/60 Hz ±3 Hz with exceptionally low harmonic distortion below 2%. This configuration enables clean power distribution through six IEC C13 outlets, four IEC C19 outlets, and three IEC jumpers, accommodating diverse equipment power requirements.
Advanced Input Management
This UPS incorporates sophisticated voltage handling through dual input options: 3-wire single-phase or 5-wire three-phase connections. Additionally, it supports adjustable input ranges of 100-275V (single-phase) or 173-476V (three-phase) at half load. The auto-sensing technology accommodates input frequencies from 40-70 Hz, enabling stable operation across various power conditions.
Battery System Performance
Utilizing lead-acid battery technology with ±192V split battery configuration, the system delivers scalable runtime through expandable battery modules. Moreover, the rapid 1.5-hour recharge time ensures quick recovery after power events. With a substantial 1195W rated charging system and battery options ranging from 3610VAh to 19855VAh, users can customize runtime requirements.
APC 10000VA Smart-UPS:
Output |
|
|---|---|
| Rated Power | 10000W / 10000VA |
| Output Voltage | 230V (configurable for 220V, 240V) |
| Output Frequency | 50/60 Hz +/- 3 Hz sync to mains |
| Output Connections | 6x IEC 60320 C13 3x IEC Jumpers 4x IEC 60320 C19 1x Hard wire 3-wire (H N + E) |
| Harmonic Distortion | Less than 2% |
| Wave Type | Sine wave |
| Crest Factor | 3:1 |
| UPS Type | Double conversion online |
| Bypass Type | Internal bypass (automatic and manual) |
Input |
|
| Input Voltage | 230V/400V 3 phases 220V, 240V, 380V, 415V |
| Input Connections | 1x hard wire 3-wire (1P + N + E) 1x hard wire 5-wire (3P + N + E) |
| Input Frequency | 40-70 Hz auto-sensing |
| Input Voltage Range | 100-275V adjustable (half load) 173-476V adjustable (half load) |
Batteries & Runtime |
|
| Battery Type | Lead-acid battery |
| Battery Voltage | +/- 192V (split battery referenced to neutral) |
| Battery Recharge Time | 1.5 hours |
| Battery Life | 3-5 years |
| Battery Power | 1805 VAh runtime |
| Battery Charger Power | 1195W rated |
| Extended Runtime Options | SRT192BP2 configurations from 3610 VAh to 19855 VAh available |
Physical |
|
| Dimensions (HxWxD) | 43.2 x 26.3 x 71.5 cm |
| Weight | 111.82 kg |
| Color | Black |
| Mounting | Rack-mounted with kit (front mounting) |
Communications & Management |
|
| Control Panel | Multifunction LCD status and control console |
| Free Slots | 1 |
| Emergency Power Off | Yes |
| Alarms | Audible and visible alarms prioritized by severity |
Environmental |
|
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-45°C |
| Relative Humidity | 0-95% non-condensing |
| Operating Altitude | 0-10000 ft |
| Storage Altitude | 0-15240 m |
| Acoustic Level | 55 dBA |
| Heat Dissipation | 1947 Btu/h |
| Protection Rating | IP20 |
Surge Protection |
|
| Surge Energy Rating | 480 Joules |
Standards & Warranty |
|
| Certifications | CE, EAC, IRAM, RCM, VDE |
| Standards | EN/IEC 62040-1 EN/IEC 62040-2 |
| Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Included Equipment |
|
| Accessories | CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card |
No products in the cart. 
Reviews
There are no reviews yet.